Versa J25 Tempered Glass RGB Edition
Versa J25 Tempered Glass RGB Edition
SKU:CA-1L8-00M1WN-01
ATX mid-tower chassis with one tempered glass window and one preinstalled 120mm fans.
-
Design
-
Specification
-
Download
-
How-to Videos
Designed for PC builders who want a sleek, custom looking case with great airflow and a crystal clear tempered glass panel – the Versa J25 is the ultimate mid-tower. This special RGB version comes with three 120mm 12V RGB front fans that are dual-mode controllable either through the front I/O panels, or by connecting to compatible Asus Gigabyte, MSI, ASRock or Biostar motherboards. The J25 supports a huge range of air and liquid cooling hardware, high-end GPUs and even a handy PSU cover in the basement.
* The image is for reference only.
* Three 120mm 12V RGB fans and one standard 120mm fan are included.
3 Built-in 120mm 12V RGB Fans
Versa J25 TG RGB is preinstalled with three 120mm 12V RGB fans that can be controlled using a simple interface built into the I/O panel that cycles through three different lighting modes and a range of different color options.
Thanks to the built-in RGB switch board, V200 TG RGB is able to deliver the ultimate RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED and BIOSTAR Vivid LED DJ -enabled motherboards.
The J25 RGB edition is equipped with a full-length PSU cover with vent hole design to hide those unsightly cables from view and give your build a clean and tidy look.
Tempered Glass Window
The left tempered glass window is designed to slide into place and can be attached firmly with two
screws at the rear panel, this 4mm tempered glass panel is more durable and shows much less wear
and tear than older acrylic panels.
Tool-Free Installation
The included hard drive bays suit 3.5” and 2.5” bays, the chassis comes with expansion slots above
and below the PSU shroud as well as behind the back panel, meaning you have space for up to seven
drives.
3.5” or 2.5” HDD Drive Compatible
Build the system of your dreams with support for a tower CPU cooler with a maximum height of 160mm, a dual expansion slot VGA of up to 330mm in length, and a power supply with length of up to 160mm.
* The image is for reference only.
* Three 120mm 12V RGB fans and one standard 120mm fan are included.
The J25 comes with three 12V RGB fans in the front and one standard 120mm exhaust fan but can also support two 120 or 140mm fans at the top. If you prefer liquid cooling, the front panel can house up to a 360mm radiator.
* The image is for reference only.
* Three 120mm 12V RGB fans and one standard 120mm fan are included.
The front panel of the Versa J25 has a centre acrylic strip that highlights any RGB fans you build into the system, while the vented grills on either side gives plenty of airflow to your components.
Handy I/O Ports
The top-front panel features two USB 3.0 data transfer ports to grant easy access when needed.
|
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Fan Supporting List
|
|||||||||||||||||||||||||
|
||||||||||||||||||||
Product Specifications
| P/N | CA-1L8-00M1WN-01 |
|---|---|
| Model | Versa J25 TG RGB |
| Case Type | Middle tower |
| Dimensions | 461 x 206 x 402 mm (18.1 x 8.1 x 15.8 inch) |
| Weight | 6.2 kg / 13.67 lb |
| Side Panel | 4mm Tempered Glass x1 |
| Color | Exterior & Interior : Black |
| Material | SPCC |
| Cooling System | Rear (exhaust) : 120 x 120 x 25 mm fan (1000rpm, 16dBA) Front (intake) : 120 x 120 x 25 mm RGB fan x3 (1000rpm, 16dBA) |
| Expansion Slots | 7 |
| Motherboard | 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
| I/O Port | USB 3.0 x 2, HD Audio x 1 |
| PSU | Standard PS2 PSU (optional) |
| Fan Support | Front: 3 x 120mm, 2 x 140mm Top: 2 x 120mm, 2 x 140mm Rear: 1 x 120mm |
| Radiator Support | Front: 1 x 360mm Rear: 1 x 120mm |
| Clearance | CPU cooler height limitation: 160mm VGA length limitation: 330mm PSU length limitation: 160mm |
