Thermaltake C1000 Pure Clear Coolant
The latest C1000 Pure Clear Coolant launched by Thermaltake is utilized either as a transparent coolant or to mix with TT Premium Concentrate Series to customize the coolant color users desire. This high performance new member is made in Germany, virtually odorless and non-flammable, plus it features anti-corrosion protection and heat-transfer medium for PC water-cooling and superb protection for copper, nickel, brass, and aluminum. Create your own coolant color and experience the excitement of color mix & match.
Create Your Own Custom Coolant Color
Decide the mix ratio of TT Premium Concentrate to
Thermaltake C1000 Pure Clear Coolant on your own, create a preferred coolant color and be an
artiste in no time.
The standard recommendation is to use a mix of 50ml TT Premium Concentrate and 950ml
Thermaltake C1000 Pure
Clear Coolant.
＜ Mix Only with TT Premium Concentrate＞
Pour TT Premium Concentrate into the reservoir filled with Thermaltake C1000 Pure Clear
Coolant. The more TT
Premium Concentrate you add, the stronger the color will appeal.
Learn More
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
German-Made Anti-Corrosive Solution
Being non-flammable, Thermaltake C1000 Coolant Series is a
ready-to-use
cooling solution with at least 3 years shelf life in airtight containers, providing great
performance while
preventing the entire cooling system – copper, brass, nickel, and aluminum – from
corrosion.
Download MSDS
*MSDS: Material Safety Data Sheet
Biodegradable Material
Thermaltake C1000 Coolant Series is classified in water hazard class 1 (low-rate endangering) according to German water hazard regulations. The product is readily biodegradable.
Vivid Application
Thermaltake C1000 Opaque Coolant is designed specifically
for PC liquid cooling
systems. Featuring anti-freezing, anti-rusting, water scale prevention and easy application,
the C1000
non-transparent coolant brings vivid colors into your build and delivers great thermal
efficiency and further
reduce the temperature of the system.
Cautions
Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks:
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while protecting the entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse, and dry. This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your water loop setup:
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while preventing corrosion in the entire cooling system (copper, brass, nickel, aluminum, and steel).
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushes the coolant into the loop.
- DO NOT let the pump run dry. If no liquid is entering the pump, turn off your power immediately.
- Fill the reservoir to the top to prevent air from entering the pump.
- If necessary, tilt the system slightly from side to side to bleed the air out of the loop.
- Place paper towels under fittings and joining points to test for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
- Before starting, flush out your system properly to prevent any coolant or unwanted particles from sticking to your tubes, radiators, and other cooling components.
- Coolant might fade over time.
| P/N | CL-W114-OS00TR-A |
|---|---|
| Color | Pure Clear |
| CAPACITY | 1000 ml |
| Hazardous component |
Ethanediol Value < 20% CAS 170-21-1 EG 203-473-3 Index 603-027-00-1 Certificate Xn R-Phrase 22 S-Phrase 2, 24/25,46 |
