Pacific PETG Tube 90-Degree Dual Compression 16mm OD - Chrome Pacific PETG Tube 90-Degree Dual Compression 16mm OD - Chrome Pacific PETG Tube 90-Degree Dual Compression 16mm OD - Chrome
Pacific PETG Tube 90-Degree Dual Compression 16mm OD - Chrome
In stock
P/N
CL-W099-CA00SL-A
USD$13.99


Thermaltake Pacific G1/4 PETG Tube 90-Degree Dual Compression 16mm OD – Chrome

The Thermaltake Pacific PETG Fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4” durable copper fittings, finished in chrome coatings, take every detail seriously. Make your system a showcase for all to see with high quality components from Thermaltake.

Tt LCS Certified

Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiasts standards that a true LCS chassis should hold to. The Tt LCS certification was created so that we at Thermaltake can indicate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations, ensuring you get the best performance from the best features and fitment.

High-Flow and Leak-Free Design

Made in Taiwan, the fittings allow proper connection to G1/4 ports, securing properly to cooling components while providing an even seal around the tubing. The fittings are available in chrome and black finishes, include six preinstalled O-ring. Use PETG tube for all your water cooling needs.
For tubes:
- Outer diameter: 5/8” (16 mm)

Remarkable Expansion

Thermaltake offers a full line of Pacific Series components for enthusiasts to build up aesthetically-superior water cooling systems by incorporating externally-modular upgrades for their chassis.


Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks:

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse, and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup:

  • It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while preventing corrosion in the entire cooling system (copper, brass, nickel, aluminum, and steel).
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushes the coolant into the loop.
  • DO NOT let the pump run dry. If no liquid is entering the pump, turn off your power immediately.
  • Fill the reservoir to the top to prevent air from entering the pump.
  • If necessary, tilt the system slightly from side to side to bleed the air out of the loop.
  • Place paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system properly to prevent any coolant or unwanted particles from sticking to your tubes, radiators, and other cooling components.
  • Coolant might fade over time.
More Information
P/N CL-W099-CA00SL-A
Dimensions 42 x 42 x 25 (H) (mm)
Weight 22 g
MATERIAL CU
Note PETG Tube To PETG Tube
Applicable OD : 16 mm (5/8”)
IMPORTANT NOTICE OF PRIVACY POLICY
0
Accessibility Menu v3.2.40-p3
0
(CTRL/⌘+U) Keyboard Shortcuts
CU
Custom
  • GN
    guarani (Brazil)
  • ZH
    简体中文 (Chinese)
  • ZH
    繁體中文 (Chinese Traditional)
  • DA
    Danish (Denmark)
  • ET
    eesti keel (Estonian)
  • FR
    française (France)
  • DE
    Deutsch (German)
  • EL
    ελληνικά (Greece)
  • GU
    ગુજરાતી (Gujarati)
  • HI
    हिंदी (Hindi)
  • MR
    मराठी (India)
  • HB
    עִברִית (Israel)
  • IT
    Italiano (Italian)
  • JA
    Jamaica (Jamaica)
  • JA
    日本 (Japanese)
  • KO
    한국어 (Korean)
  • LA
    latvian (Latviski)
  • LI
    Lietuvių (Lithuanian)
  • UR
    اردو (Pakistan)
  • PL
    Polish (Poland)
  • PT
    Portuguese (Portugal)
  • RU
    Россия (Russia)
  • AR
    عربي (Saudi Arabia)
  • ES
    Español (Spanish)
  • SW
    Sverige (Sweden)
  • TE
    తెలుగు (Telangana)
  • TR
    Türkiye (Turkey)
  • EN
    English (UK)
  • EN
    English (USA)
  • VI
    Việt Nam (Vietnamese)
  • CU
    Custom
Accessibility Profile None
Visually-impaired
Blind
ADHD
Dyslexia
Eco-Mode
 
Decrease Font Size
info
 
Increase Font Size
info
 
Saturation
info
 
Invert Colors
info
 
Highlight Links
info
 
Heightlight Headers
info
 
Read Selected
info
 
Read Page
info
 
Line Height
info
 
Letter Spacing
info
 
Change Curser
info
 
Text Align
info
 
Pause Animation
info
 
Change Fonts Type
info
 
Hide Images
info
 
Mute Sounds
info
 
Tooltip
info
 
Read Focus
info
 
Page Structure
info
 
Keyboard Navigation
info
Back
Accessibility Statement

We understand the importance of accessibility for all of our customers, including those with disabilities. While our website may not currently meet the Web Content Accessibility Guidelines (WCAG) 2.1, Level AA, we are actively working towards compliance and constantly seeking ways to improve the user experience for all of our customers.

To that end, we have implemented a variety of accessibility tools provided by third-party app, AppifyCommerce. These tools include features such as keyboard navigation, high contrast mode, font resizing, and alternative text for images read focus, various cursor sizes. We have also incorporated tools to help with visual impairments, such as screen readers and text-to-speech functionality.

In addition to these technical solutions, we have also made a commitment to providing clear and easy-to-understand information on our website. This includes using simple and straightforward language, providing alternative text for images and videos, and including clear and detailed product descriptions.

We understand that accessibility is an ongoing effort and that there may be areas of our website that are not fully accessible. If you have any difficulty accessing our website or have any suggestions for improvements, please contact us at [email or phone number]. We will make every effort to respond to your request as soon as possible and work towards resolving any issues you may have encountered.

We also strive to provide equal access to our products and services, including our online store and customer service channels. So, we are always open to feedback, suggestions, and ideas on how we can continue to improve accessibility on our website and in all aspects of our business.

Our ultimate goal is to ensure that all of our customers, regardless of ability, have a positive and seamless experience when visiting our website and purchasing from our store. Thank you for visiting our store and for your patience as we continue to work towards full compliance with the WCAG guidelines.

Developed by
AppifyCommerce
Developed by AppifyCommerce
www.appifycommerce.com
Pacific PETG Tube 90-Degree Dual Compression 16mm OD - Chrome
Pacific PETG Tube 90-Degree Dual Compression 16mm OD - Chrome
Pacific PETG Tube 90-Degree Dual Compression 16mm OD - Chrome